系統

System

項目

Item

單位

Unit

基本參數

Basic paramters

基本規格

Basic Spec

適用原料 Plastic fit for

PE

制品容量Max hollow product volume

L

30

機頭數Diehead amount

set

1

機器外型尺寸（長x寬x高）Size(LxWxH)

M

5.48×5.13×4.26

機器重量Weight

ton

20

鎖模系統

Clamping System

鎖模力Clamping force

kN

200

模板間距Template distance

mm

450-900

模板行程Template stroke

mm

450

模具尺寸(寬x高)Max mould size(WxH)

mm

870×700

模具厚度Mould thickness

mm

455

系統壓力Syetem Pressure

Mpa

12

擠出系統

Extrusion System

螺桿直徑Screw Dia

mm

100

螺桿長徑比Screw L/D ratio

L/D

26

塑化能力（HDPE）Plasticizing capacity (HDPE)

Kg/h

200

螺桿加熱段數Screw heating zone

zone

5

螺桿加熱功率Screw heating power

kW

34

螺桿風機功率Screw fan’s power

kW

1.2

擠出電機功率Extrusion motor’s power

kW

55

模頭

Die head

模頭加熱段數Diehead heating zone

zone

2

模頭加熱功率Diehead heating power

kW

16

擠出口模直徑Sprue-die dia(max)

mm

200

儲料容積Accumulator Volume

L

12

能耗

Power

總裝機功率General power

kW

136.2

油泵電機功率Oil-pump motor power

kW

30

氣源壓力Air pressure

Mpa

0.6-0.8

平均能耗Average power

kW

68

壓縮空氣用量Compressed air dosage

m³min

0.8

冷卻水用量Cooling water dosage

L/min

100