粘度計(表觀),發(fā)動機油表觀粘度測定器(JSH1902)
JSH1902 面議津市市石油化工儀器有限公司
津市市石油化工儀器有限公司
產品型號：JSH2502
產品名稱：防銹性能試驗器(JSH2502)
產品說明：
JSH2502防銹性能試驗器
一、符合GB/T11143、ASTM D665標準
二、主要技術參數：
控溫范圍：常溫～60℃
控溫精度：±1℃
控溫方式：數顯溫控儀控溫
加熱方式：電熱管加熱
試樣孔數：4孔
熱浴攪拌：電機攪拌
試樣攪拌：減速電機攪拌 1000±50r/min（數字顯示）
功 率：2KW
工作電源：AC220V±10％ 50HZ
三、性能及特點：
1、本儀器可同時做四個樣，采用一機四孔分別攪拌方式，四個攪拌電機分別獨立控制，可以滿足試樣攪拌速度1000±50r/min；
2、采用數顯溫控儀控溫，具有控溫準確，顯示直觀；控制溫度可設定在常溫～60℃范圍內任意一點；
3、采用數顯計時器計時，計時準確，顯示直觀；
JSH2502 anti-rust tester
I. Comply with GB/T11143 and ASTM D665 standards
Ii. Main Technical parameters:
Temperature control range: normal temperature ~ 60℃
Temperature control accuracy: ±1℃
Temperature control: Digital display temperature controller
Heating mode: Electric heat pipe heating
Number of sample holes: 4
Hot bath stirring: Motor stirring
Sample stirring: speed reduction motor stirring 1000±50r/min (digital display)
Power: 2 kw
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. The instrument can make four samples at the same time, and adopts a machine with four holes for separate stirring, and four stirring motors are independently controlled, which can meet the sample stirring speed of 1000±50r/min;
2. Adopt digital display temperature controller to control temperature, with accurate temperature control and intuitive display; The control temperature can be set at any point within the range of normal temperature ~ 60℃.
3. Use digital display timer for timing, accurate timing and intuitive display;
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
包裝印刷網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
