特點：
?選用優質材料及配件。
?傳動齒輪加硬，研磨而成，洛氏硬度50~55。
?自動歸零，自動復位。
?所有間隙電腦或電動調整。
?應用免鍵連續環，減少中心磨損，虛位放大，保持長時間印刷套準。
?所有輥軸鍍鉻，增加強度。
?采用進口PLC、觸摸屏多功能控制。
?可儲存常用訂單，加快換單操作。
?全部電器，電子及氣動元件均采用歐洲標準。

APSⅠ全電腦型水性印刷開槽模切機

APSⅠ CNC Flexo Printing Slotting Die-cutting Machine

特點：

v        整臺機器是按照高要求，高速度，高效率，可靠性及安全性而設計制造，快速換單，操作方便。

v        選用優質材料及配件。

v        傳動齒輪加硬，研磨而成，洛氏硬度50~55。

v        自動歸零，自動復位。

v        所有間隙電腦或電動調整。

v        應用免鍵連續環，減少中心磨損，虛位放大，保持長時間印刷套準。

v        所有輥軸鍍鉻，增加強度。

v        采用進口PLC、觸摸屏多功能控制。

v        可儲存常用訂單，加快換單操作。

v        全部電器，電子及氣動元件均采用歐洲標準。

 

Features:

v        The machine is designed and made for high quality, high speed, high efficiency, high stability and high safety, convenient for quick order update and operation.

v        Made with high quality materials and parts.

v        Well hardened and ground transmission gears with hardness 50~55 （HRC）.

v        Auto zero return and auto reset.

v        All gaps between cylinders and rollers are computerized or motorized adjustment.

v        Key-free connection rings to reduce central wear, to keep stable precise printing.

v        All cylinders and rollers are hard chromed for ideal hardness.

v        Use imported PLC. PLC touch screen for multifunctional control.

v        Being able to save daily orders to speed up the order update.

v        All electric, electronic and pneumatic components are of  European standards.

 

送紙部：

v        采用德國進口伺服控制前緣送紙裝置。

v        真空吸附裝置，吸風量可視紙板尺寸，彎曲程度做適當調整，確保供紙平穩準確。

v        電動控制機體離合，附警鈴，行進時持續響鈴，確保操作人員安全。

v        每臺之間，有急停開關，可由內部控制機臺的移動，確保內部操作人員的安全。

v        傳動軸附摩擦式離合器，避免錯誤動作而損壞機器。

v        氣壓式連鎖裝置。

v        主機馬達啟動保護裝置（機臺未鎖固時，主機無法啟動運轉）。

 

Feeding Unit

v        Lead feed system with four-shaft structure is controlled by servo, imported from Germany.

v        Vacuum suction system. The air volume can be set in accordance with different paperboard bending conditions so as to feed paper smoothly.

v        Every unit equips with an emergency stop switch to control the section movement from inside to guarantee the operators' safety.

v        All units of the machine can be separated automatically and an alarm sounds during opening and closing for safe operation.

v        The frictional clutch is installed on transmission shaft to avoid damaging machine due to incorrect actions.

v        Pneumatic interlock device.

v        The main motor activates the protection device. .If the unit is not locked, the main motor can not start.

印刷部：

v        印刷輥選用優質鋼板，表面研磨，鍍硬鉻。

v        快速換版裝置，節省時間。

v        印刷壓輥間隙采用電腦調整，數字設定。

v        配合適紙系統氣壓自動升降裝置（送紙時網紋輥下降與印版接觸，停止送紙時網紋輥上升與印版分離）。

v        相位調整機構，行星式齒輪構造。

v        印刷相位采用PLC、觸摸屏控制，電機360度調整（運轉、停止均可調整）；可儲存訂單。

v        印刷相位固定裝置，電磁離合器制動式剎車機構。當機組分離或調整時，剎車機構限制機臺轉動，保持原有齒輪位置固定點。

v        清洗印版后自動復位系統。

v        電動數字調整橫向位置，調整距離共20mm。

v        鋼制網紋輥：鋼管表面研磨，壓制網紋，鍍硬鉻。

v        橡膠輥：鋼管表面包裹耐磨橡膠，橡膠輥中搞特殊研磨，傳墨效果好。

v        陶瓷網紋輥（選配）：鋼管表面覆蓋陶瓷研磨，激光雕刻網紋，比鋼制網紋輥耐磨，壽命長。

Printing Unit

v        The cylinder is made of good steel board and its surface is plated hard chromium after it is grinded.

v        Quick hanging forme device can save more time.

v        Adjusting clearance of impressing roller by computer, and digital setting.

v        Anilox roller matchs with feeding system up and down automatically to protect forme and reduce the waste of cardboard.

v        Printing phase is controlled by PLC and touch screen and can be reset electrically with 360 degree adjustment （no matter running or stopping）,and be able to store orders.

v        Regulating printing phase position is motorized by planetary gear system and digital displays.

v        Resetting automatically after cleaning the forme

v        Transversal movement regulating by motor covers 20mm.

v        Steel anilox roller: Surface of the roller is plated hard chromium after it is grinded and knurled.

v        Rubber roller: The steel roller is covered by anti-abrasion rubber, and the middle of the rubber roller is high than two sides to ensure much well printing ink transfer.

v        Ceramic anilox roller: Surface of the roller is covered with ceramic after it is grinded and knurled by laser. The life of ceramic anilox roller is more than that of steel one （ Enabling to be provided）.

 

開槽部：

v        預壓輥、壓線輪、開槽刀座橫移位置采用PLC、觸摸屏控制；可儲存訂單。

v        開槽相位調整機構，行星輪齒輪構造。

v        開槽相位采用PLC、觸摸屏控制，電動數字式360度調整（運轉、停止均可調整）。

v        控制面板配有10.4英寸觸摸屏。

v        平衡校正，增加運轉穩定性。

v        預壓輪：經預壓線后的紙板不易壓破。

v        上壓線輪包裹優力膠，不會損壞紙板。

v        開槽刀寬7mm，合金鋼材質，經熱處理研磨齒形開槽刀，雙片式修邊，刀口鋒利，精密度高。

 

Slotting Unit

v        Transversal movement of slotting knife, pre-pressing wheel and creasing wheel are controlled by PLC and touch screen. Being able to store orders.

v        The structure of regulating slotting phase is planetary gear system.

v        Slotting phase is controlled by PLC and touch screen can be reset electrically with 360 degree adjustment （no matter running or stopping）.

v        Controlling panel with 10.4 inches touching screen。

v        Balance adjustment can enhance the stability of the machine.

v        Pre-pressing wheel: After pre-pressing, cardboard can’t be damage.

v        Upper creasing wheel is covered with polyurethane rubber to prevent from damaging cardboard.

v        Thickness of the alloy slotting knife is 7mm.The knife with high precision is heated and grinded, and has sharp and blade.

 

模切部：

v        滾軸采用優質鋼材，經研磨，鍍硬鉻。

v        速度補差裝置，控制膠滾筒的表面速度，不論膠墊的直徑如何變化，膠墊表面的速度*由刀模操縱，使模切的紙箱與刀模形狀**。

v        膠墊輥機械式凸輪橫向移動40mm游動裝置。

v        模切相位采用PLC、觸摸屏控制，電動數字式360度調整（運轉、停止均可調整）。

v        配備膠墊修復系統，延長膠墊使用壽命，降低成本。

v        相位調整機構，行星輪式構造。

v        傳動齒輪采用20CrMnTi。

 

Die Cutting Unit:

v        Rollers: Adopting high quality steel pipe and the pipe is grinded and plated hard chromium.

v        Adopting synchronizer to make the speed of die cutting roller and rubber pad roller is consistent so as to improve the precision of die cutting, no matter rubber pad wears. So this can ensure the shape of the cutting cardboard are the same as the die-cutting pattern.

v        Anvil roller （up roller）: Mechanical helix fluted-roll type, transverse movement 40mm.

v        Die cutting phase is controlled by PLC and touch screen can be reset electrically with 360 degree adjustment （no matter running or stopping）.

v        Fitting with the rubber repair system to prolong service life and lower the cost.

v        Regulate die cutting phase position with planetary gear structure.

v        Transmission gears are made of 20CrMnTi.

 

技術參數specifications：

APSⅠ參數Data	型號Model	1000*1800	1000*2500	1200*2500	1400*2800	1600*2800
zui高運行速度 Max.speed （p/min）		200	200	200	180	160
zui大紙板尺寸Max.size of board （mm）		1000*1850	1000*2550	1200*2550	1400*2850	1600*2850
zui小紙板尺寸Min.size of board （mm）		260*400	260*400	300*420	330*450	380*450
隔張送紙 Skip feeding size （mm）		1150*1800	1150*2500	1350*2500	1550*2800	1750*2800
zui大印刷面積 Max.printing size （mm）		1000*1800	1000*2500	1200*2500	1400*2500	1600*2800
標準印版厚度 Thickness of printing plate （mm）		7.2	7.2	7.2	7.2	7.2
zui小開槽間距 Min. Slotting size （mm）		180*180*180*180	180*180*180*180	180*180*180*180	180*180*180*180	180*180*180*180